Integral fitting tee by process (2)

Integral fitting tee by process (2)
2. Hot Press forming

  integral fitting tee Hot Press forming is greater than the diameter of the integral fitting tee tube, flattening the size of about to integer fitting tee diameter, open a hole in the stretch of the branch pipe portion; tube is heated, placed in the forming mold, and the tube is loaded in the stretch manifold die; tube is radially compressed under pressure, theThe whole process is through the tube and the branch pipe portion of the radial compression stretching process and forming.Unlike hydraulic bulging integral fitting tee, the metal of the hot-pressed integral fitting tee manifold is compensated by the radial motion of the tube billet, so it is also known as the radial compensation process.


integral fitting tee


  As a result of heating after pressing integral fitting tee, material forming equipment required to reduce the tonnage.Hot integer fitting tee wide adaptability to materials, suitable for low carbon steel, alloy steel, stainless steel materials;especially large diameter and wall thickness of the partial integral fitting tee, usually using this forming process.