advantage of the casting
Casting rim, the form of the blank is correct, the process volume is little, the value is low, however there area unit casting defects (pores, cracks, inclusions); the interior flow of the casting is poor (if it's a cutting half, the contour sort is worse);
Forklift Accessories Suppliers
Forklift Accessories,1. Raw Material: Purchased from entrusted supplier with third party inspection.
high pressure union china
high pressure union china Package 1. Cartons Without Pallets. 2. Cartons With Pallets. 3. Double Woven Bags
integral forged tees suppliers
Integral Forged Tees, Crossovers, Elbows, Wyes, Laterals and Crosses are based on the technology from FMC.
Design features of weco wing union
1. Weco wing union is made of precision spherical surface and 90-degree conical surface
processed by precision machine tool, so that the product has good
strength and high pressure;
improvements for high pressure swivel joint
high-pressure swivel joint can be used according to different needs and can be classified and
improved, so that the connection between the high-pressure swivel joint
and the machine is more convenient, thus greatly improving the
efficiency of components.
Introduction to cementing hose loop
Cementing hose loop is mainly used for conveying fluid flow in high-pressure discharge pipeline, well test pipeline and cementing mud pipeline.
What are the uses of weco wing Union
Use of weco wing union: weco wing union can be widely used in pipelines with low pressure, large diameter,
large dislocation and often need to be loaded and unloaded, especially
in connection with mud tanks of a solid control system in the petroleum
What if the surface of the high-pressure flange turns yellow after brushing oil
In order to prevent rust, the surface of the high-pressure flange is usually brushed with a layer of rust-proof oil, but after a long
time, the surface will adhere to a large amount of dust, and the oil
will be oxidized, making the high-pressure flange look yellow.
Contrast Method of Carbon Steel Flange and Forged Flange
Secondly, destructive tests are made to separate flanges. The cast
flanges have trachoma and the pure forged ones do not. Sometimes the
cast-forged flanges have cracks.
The production process of the Forged flange
Forging process generally consists of the following steps, namely the
selection of high-quality billet material, heating, forming, cooling
after forging. The process methods of forging flange are free forging, die forging and fetal film forging. Production,
according to the size of the forging qu
Integral fitting tee by process (2)
2. Hot Press forming
integral fitting tee Hot Press forming is greater than the diameter of the integral fitting
tee tube, flattening the size of about to integer fitting tee diameter,
open a hole in the stretch of the branch pipe portion; tube is heated,
placed in the forming mold, and the t